CJ19I(CJ19S) CONTACTOR

CJX2-F-N MECHANICAL INTERLOCKING CONTACTOR

26 نوفمبر، 2022

CJX2S-N MECHANICAL INTERLOCKING CONTACTOR

26 نوفمبر، 2022

Published by infinityelectric on 26 نوفمبر، 2022

Product Structure

General

CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor. The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the capacitor is cut off.
Standard: IEC/EN 60947-4-1.

Type Designation

Operation Conditions

Ambient temperature:-5℃~+40℃, the average during 24 hours should not exceed +35℃;
Altitude:≤2000m;
Atmosphere conditions: At mounting site, relative humidity not exceed 50% at the max temperature of +40℃, higher relative humidity is allowable under lower temperature. For example, RH could be 90% at +20℃, special measures should be taken to occurrence of condensation;
Pollution degree: 3
Installation category: III
Installation conditions: the inclination between installation plane and vertical plane is within ±5°
Impact and shake: the products should locate in the places where there are no obvious impact and shake.